Scattering coefficients for a sphere in a visco-acoustic medium for arbitrary partial wave order

Analytical solutions are reported for the scattering coefficients of a solid elastic sphere suspended in a viscous fluid for arbitrary partial wave order. Expressions are derived for incident compressional and shear wave modes, taking into account the viscosity of the surrounding fluid and resultant wave mode conversion. The long compressional wavelength limit is employed to simplify the derivation, whereas no restriction is placed on the shear wavelength in the fluid compared to the particle dimension. The analytical approximations are compared with numerical results obtained from matrix inversion of the boundary equations and agree within the validity domain of the solutions.     

System-size effect on the friction at liquid-solid interfaces

The friction at the liquid-solid interfaces is widely involved in various phenomena ranging from nanometer to micrometer scales. By the molecular dynamic(MD)simulation, the friction properties of liquid-solid interfaces at the molecular level are calculated via the Green-Kubo relation. It is found that the system size will influence the value of the friction coefficient, especially for the solid surfaces with the larger polar charge. The value of the friction coefficient decreases with the increase in the system size and converges at large system sizes. The large polar charge will lead to a significant friction coefficient. However, the diffusion of water molecules on this surface is almost a constant, indicating that the diffusion coefficient seems to be independent of the system size and polar charge. This work provides insights for the selection of the system size in modeling the frictional properties of hydrophobic/hydrophilic surfaces.     

Nonlinear obstacle problems with double phase in the borderline case

In this paper we study a double phase problem with an irregular obstacle. The energy functional under consideration is characterized by the fact that both ellipticity and growth switch between a type of polynomial and a type of logarithm, which can be regarded as a borderline case of the double phase functional with $(p,q)$-growth. We obtain an optimal global Calderón–Zygmund type estimate for the obstacle problem with double phase in the borderline case.     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束，在使用的振动环境中，会因弯曲应力而导致破裂，影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上，得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数，使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．     

White and some colored marbles as alternative radiation shielding materials for applications

ABSTRACT

In this paper, the radiation shielding parameters such as linear attenuation coefficients (LAC, µ), mass attenuation coefficients (MAC, µ/ρ), effective atomic numbers (Z_eff), effective electron densities (N_eff), half value of layers (HVL), mean free paths (MFP) and buildup factors (exposure (EBF) and energy absorption (EABF)) were investigated for cream (M1), pink (M2), white (M3), maroon (M4) and green (M5) marbles. Attenuation coefficients were measured in the energy region 31.18–661.66 keV photon energies. The values of Z_eff and N_eff were then calculated using these coefficients with logarithmic interpolation method, and HVLs and MFPs were calculated using the values of LAC of marble samples at the same photon energies. The experimental results were compared with the theoretical values obtained from WinXCom program, and good agreements were observed between the experimental and theoretical results. HVLs and MFPs of all marble samples were compared with those of some concretes, glasses and commercial radiation shielding glasses (SCHOTT Co.). The studied marbles were better radiation shielding materials than standard shielding concretes due to lower HVL and MFP values lower than the ordinary concrete. Finally, EBFs and EABFs of the marbles were calculated in the energy region 0.015–1?MeV up to penetration depths of 40 mfps by Geometric Progression method (G-P), and the results were discussed in terms of photon energies and chemical compositions of the marbles.     

Computational study of the formation of aluminum-graphene nanocrystallites

The molecular dynamics method is used to study the formation of the Al/graphene nanocomposite in the structural grains of different size under the action of internal stresses. The behavior of graphene sheets inside an individual structural grain as well as in the process of two Al grains containing graphene are joined is investigated. The motion of graphene films, starting from the middle of the aluminum matrix, ends with their location at the crystallite boundaries. Graphene moves in the Al matrix along closely packed planes. In this case, graphene sheets acquire curvature. An intergrowth of graphene sheets is also observed. A contact between two Al-C nanocrystallites through a graphene interlayer is created. The self-diffusion coefficients of atoms and the partial potential energies increased with decreasing nanocrystallite size. The angular distribution of the nearest geometric neighbors and the distribution of distances to the nearest neighbors are determined using the construction of Voronoi polyhedra.     

Metastable states in high carbon C–(Fe,Ni, Co) films obtained by three-electrode ion-plasma sputtering

Abstract

The effect of ion-plasma deposition on the structure of high-carbon films (at. %) Fe–(20–84) % С, Co–(5–52) % С, Ni–(7–61) % С was investigated. The lattice periods and crystallite sizes of nonequilibrium phases in the as-deposited state and after heating are determined. The temperatures of the beginning and end of the decay of metastable phases during heating at a constant speed are established. The transition from an amorphous to an equilibrium crystalline state in Fe–C films passes through the stage of formation and subsequent decomposition of an intermediate, metastable hcp phase of variable composition. The electrical and hysteretic magnetic properties of the films were measured in the as-deposited state and after heat treatment. The compositions and conditions for producing films with low values of the temperature coefficient of electrical resistance and high coercive force are established. Thus, high-carbon films of Ni–61% C in the as-depoteted state and Fe–69% C films after heating to 900?K are characterized by small TCR values (± 10^?6 К^?1) over a wide temperature range.     

基于VIKOR和关联系数的犹豫三角模糊语言多属性决策方法

针对属性评价值为犹豫三角模糊语言集的多属性决策问题,提出一种基于VIKOR方法的犹豫三角模糊语言多属性决策方法.首先定义了犹豫三角模糊语言集的相关概念.然后运用VIKOR和关联系数方法,在可接受优势和决策过程稳定的条件下对方案进行择优,在理论分析的基础上,提出了这种新方法的计算步骤.并构建了确定最优属性权重的非线性规划模型,研究了当专家权重和属性权重未知情况下的犹豫三角模糊语言多属性决策方法.最后通过实例说明了该方法的有效性和可行性.     

基于激光雷达的垂直能见度反演算法及其误差评估

针对大气垂直方向上消光系数分布不均匀难以用传统方法直接测量垂直能见度的问题,提出了一种基于激光雷达探测垂直能见度的计算方法。根据大气辐射传输基本原理,借助于辐射传输方程,推导出了垂直能见度的计算公式;然后利用激光雷达原理方程和Klett算法反演出大气垂直方向上的消光系数分布,基于此提出了垂直能见度的迭代算法。最后,利用灰色模型GM(1,1)和批统计算法,对激光雷达反演得到的后向散射系数进行了评估,给出了误差置信区间为(0.760±0.339)×10^-4(srad·km)^-1。结果表明,该方法是一种特别有效的计算垂直能见度的方法,符合探测的基本需求,且误差小精度高。